TelcoBridges 3200 Series Gateway 1+1, Руководство по установке

Страница: 50 / 68

3200 Series Standalone and 3200 Series 1+1 System Installation Guide
44
2.6.2 Install the 3200 1 Unit on the Equipment Rack
The 3200 1 unit is mounted on a customer provided equipment rack using the mounting
hardware packaged in the box. Refer to
Section 2.2 “Rack Mounting the 3200 Series Standalone or
3200 Series 1+1 System” on page 11.
2.6.3 Install a 1+1 Patch Panel
Note
This section only applies to the TMG3200 and TSG3200.
If your system features a 3200-TE TDM
interface, use a 1+1 patch panel (32/T1/E1).
Refer to
Section 2.5.4.1 “SCSI Interface
(T1/E1) for the 3200-TE and 3200-TE+1” on
page
31.
Note: Patch panels must be replaced by the
3200-TE-1+1 patch panels.
If your system features a 3200-DS3 TDM
interface, use a 1+1 patch panel (DS3). Refer
to Section
2.5.4.2 “Dual BNC Interface (DS3)
for the 3200-DS3 and 3200-DS3+1” on
page
33.
If your system features a 3200-STM1 TDM
interface, use a 1+1 patch panel (STM1).
Refer to Section
2.5.4.3 “Optical Interface
(OC3/STM-1)” on page 34.
Gateway Gateway
Gateway Gateway
APS Main APS Main APS Main