Chapter 3
General safety instructions
Chapter 3: General safety instructions
3.1 Certifications
The equipment described in this Manual has been designed and manufactured by TEL-
MAR to satisfy the essential quality and safety requirements foreseen by the following
European Directives, in the case of being part of a complete TEL-MAR transmitter:
◊
Low Voltage 93 / 68 / CEE (modified from 73 / 23 / CEE).
◊
Electromagnetic compatibility 89 / 336 / CEE and following modifications up to 1998.
If the equipment is intended to be used stand alone, it is considered as a subunit, for which it
doesn’t need any CE certifications. In this case the equipment has imperatively to be used
with an isolating transformer with earthed screen shot, with an AC line filter, in the confines of
a shielded room.
If the transmitter (or transposer) is to be used as a part of a transmitter different from those
manufactured by TEL-MAR , it will be care of the customer to verify that the complete system
will satisfy the current legislation for safety and electromagnetic compatibility, in the
country where it will work.
TEL-MAR requests all users of the equipment to follow exactly the instructions, procedures
and recommendations contained in this Manual, and to do so in accord with current
Health and Safety at Work legislation in the country of use.
TEL-MAR assume no responsibility for injury to persons, animals or
damage to property, however caused, which stems from any breach of
the rules or recommendations given in this Manual.
Page 9
