14
NTSC Mode
With this control, when running in 525 line mode, the user can select
whether the NTSC composite output video has a 7.5 IRE pedestal
applied.
Blue Screen on Fail
When the link fails, the user can select between a blue field video output
(YES), and a freeze frame (NO) with this option.
Unit Name
This field allows the user to enter an identifier for the service that they
wish to receive. This must match that selected at the transmitter for the
service to be decoded. The unit name can be constructed of any eight
ASCII characters.
Descrambling
If the AES scrambling option has been purchased for the
DLC
system
in use, then it is possible to encrypt the link. Descrambling must also be
enabled at the receiver by selecting AES128 or AES256 in the
descrambling field. At this point the user will need to ensure that the
correct key is in use at the receiver and this is done by selecting
Options / Write AES Key
in the receiver controller.
The key is a 128bit value for AES128 and a 256bit value for AES256,
and is entered as 32 or 64 ASCII hexadecimal characters (0...F).
Decoder Lock Status (Status Only)
This field reports whether the video decoder is successfully locked to the
incoming digital bit stream.
Current Config
This field allows the user to select which of the 8 memory configs the
receiver is operating in. The receiver has 8 stored configurations and
the user can move between them by setting the appropriate number in
this field. Changes made to other settings by the user will automatically
be stored in the configuration number indicated by this field.
Serial Number (Status Only)
This status information is the electronic serial number of the transmitter
PCB. This number can be exchanged with
TEL-MAR
to purchase extra
licensable features, such as upgrades to support AES decryption.
