10
DVB-T 8MHz bandwidth. To select 6MHz and 7MHx DVB-T modes the
user must first click on ‘Advanced’ to enter the Advanced setting page.
Input Frequency (MHz)
The receive frequency can be changed by entering the new desired
frequency in this field. Values outside the range supported by a
particular transmitter type will be rounded to the highest of lowest
supported frequency as appropriate.
The receive frequency can be set in step sizes of 250kHz.
Service Name
This field allows the user to enter an identifier for the service that they
wish to receive. This must match that selected at the transmitter (Unit
name) for the service to be decoded. The service name can be
constructed of any eight ASCII characters.
Descrambling
If the AES scrambling option has been purchased for the
DLC-5000 or
DLC-7000
system in use, then it is possible to decrypt the link.
Descrambling must be enabled at the receiver by selecting either
AES128 or AES 256 in the descrambling field. The actual descrambling
key can then be entered by clicking on the yellow ‘key’ icon.
File Options
Load Config
– used for loading a single configuration data from text file.
Save Config -
used for saving configuration data to text file.
Load Config Set
– used for loading all 8 configurations from a text file
Save Config Set -
used for saving all 8 configurations to a text file
On a receiver there are 8 separate configurations for Narrowband and 8 separate
configurations for DVB-T.
