Tektronix TMS 540 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 89

background image

TMS 540 PowerPC 60X Microprocessor Support Instruction Manual

v

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it. To avoid potential hazards, use this
product only as specified.

Only qualified personnel should perform service procedures.

While using this product, you may need to access other parts of the system. Read
the General Safety Summary in other system manuals for warnings and cautions
related to operating the system.

Use Proper Power Cord.

Use only the power cord specified for this product and

certified for the country of use.

Connect and Disconnect Properly.

Do not connect or disconnect probes or test

leads while they are connected to a voltage source.

Ground the Product.

This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings

and marking on the product. Consult the product manual for further ratings
information before making connections to the product.

Do not apply a potential to any terminal, including the common terminal, that
exceeds the maximum rating of that terminal.

Use Proper AC Adapter.

Use only the AC adapter specified for this product.

Do Not Operate Without Covers.

Do not operate this product with covers or panels

removed.

Use Proper Fuse.

Use only the fuse type and rating specified for this product.

Avoid Exposed Circuitry.

Do not touch exposed connections and components

when power is present.

Do Not Operate With Suspected Failures.

If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation.

Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

To Avoid Fire or

Personal Injury

«
...
7
8
9
10
11
...
»

Содержание TMS 540


























































































Отзывы:

Нет отзывов

Похожие инструкции для TMS 540

Бренд: dbx Страницы: 12

Бренд: dbx Страницы: 13

Бренд: dbx Страницы: 72

Бренд: dbx Страницы: 11

Бренд: dbx Страницы: 16

Бренд: Eazyzap Страницы: 32

Бренд: Obdstar Страницы: 42

Бренд: Hammer Страницы: 42

Бренд: Halyard Страницы: 88

Бренд: HALDER Страницы: 2

Бренд: Hällde Страницы: 40

Бренд: Hällde Страницы: 6

Бренд: ParaBody Страницы: 3

Бренд: Valiani Страницы: 66

Бренд: R&S Страницы: 2677

Бренд: U-Line Страницы: 9

Green Machine H-3518

Бренд: U-Line Страницы: 3

Бренд: JBM Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды