Tektronix TLA7000 Series, Руководство по установке

Страница: 33 / 121

Basic Installation
d. If you know the hostname or IP address of the TLA, add it to the list of
hosts to search.
e. Click Search .
When the search is complete, the mainframe is listed in the display.
11. Select the mainframe and click the Connect button. The application opens on
the controller display.
12. For information about operating your logic analyzer, refer to the TLA Quick
Start User Manual and to the online help.
Private LAN (Benchtop
Mainframe)
The benchtop mainframe requires an external PC controller; you can use the
TLA7PC1 Benchtop PC Controller or your PC loaded with the TLA application
software. The controller and mainframes communicate through Ethernet
connections.
You need a GbE network switch for optimum fi le transfer speed between the
controller and the benchtop mainframe. For stand-alone installations, you must
also connect a router to the network switch to assign IP addresses through DHCP.
Routers can be purchased from other vendors; the D-Link model DI-604 met the
requirements at the time of publication.
The following fi gure shows the private LAN setup for the benchtop mainframe.
Figure 12: Benchtop mainframe private LAN setup (up to six modules)
Con fi gure the Setup.
To con fi gure the benchtop mainframe in a private LAN
setup, do the following:
1. Make the cable connections from the controller, through the switch and router,
to the mainframe.
2. Connect the peripheral components that you plan to use. (See page 45,
Connecting Accessories .)
3. Connect the power cord to the router and power on the router.
4. Connect the power cords and power on the controller and mainframe.
TLA7000 Series Logic Analyzers Installation Manual 15