Tektronix PHASER 380, Руководство по обслуживанию

Страница: 89 / 346

Service Manual 3-7
Verifying the Printer and Host Connections
3
4. A print dialog box appears on the screen. Click on the Print button in
the upper right corner of the dialog box to send a file to the printer.
If problems occur at this point, download the error handling utility to the printer
as explained in the next procedure. Contact the Customer Support Hotline at
1-800-835-6100. Refer to the Phaser 380 User Manual. Each provides information
on using the printer with specific applications.
Using the Error Handler utility
If the Macintosh does not print to the printer, reset the printer and then load the
error handling utility into the printer’s memory using the front panel menu item
Printer Defaults — PS Error Handler
Alternatively, reset the printer and then download one of the Tek Error Handler
utility files to the printer or enable the error handler from the front panel.
1. Place the printer's Macintosh Printer Utilities diskette in the disk
drive.
2. Select the Phaser 380 printer in the Chooser.
3.
Locate the Tek Error Handler file in the folder of utilities files.
4. Double-click the LaserWriter utility.
5. From the Utilities menu, select Download PostScript file. Select the
file Tek Error Handler and download it to the printer.
This loads the error handling utility into the printer's memory where it remains
until the printer is turned off. Send a file to the printer as explained in the
previous procedure. If an error occurs, the printer will print a page listing the
error.