Tektronix NetTek YBT1E1, Руководство пользователя

Страница: 33 / 122

Getting Started
NetTek YBT1E1 T1 & E1 Circuit Tester User Manual
1- 15
4. Follow the on-screen instructions to set the location and amount
of pressure needed for the touch-screen to respond to your taps.
Apply pressure to the touch-screen for approximately 5 seconds
at each position, until the target moves.
5. Select OK to close the dialog box and save your settings.
Installing NetTek YBT1E1 Software
Follow the procedures in Appendix D, Installing NetTek YBT1E1
Software , to install, upgrade, or reinstall the NetTek YBT1E1
Option T1 or Option E1 software on the NetTek Analyzer Platform.
Starting the NetTek YBT1E1 Software
Do one of the following to start up the NetTek YBT1E1 measure-
ment software:
H
Double-tap the YBT1 or YBE1 application icon on the NetTek
Analyzer Platform desktop.
H
Select Start > Programs > NetTek > YBT1 (or YBE1) in the
taskbar.
H
Configure the NetTek YBT1E1 software to start up automatically
at power on.
Figure 1--13 shows a typical power-on screen of the YBT1E1 Tester
Option T1 software.