Tektronix NetTek YBT1E1, Руководство пользователя

Страница: 31 / 122

Getting Started
NetTek YBT1E1 T1 & E1 Circuit Tester User Manual
1- 13
Batteries are partially charged and calibrated at the factory. A
calibrated battery allows the NetTek Analyzer Platform to more
accurately estimate how much longer the software can operate
before the instrument automatically powers off. The software always
warns you before it powers off, so that you can save important test
results or settings.
To verify the status of your batteries at any time:
1. Select Start > Settings > Control Panel .
2. Double-tap the Power Management icon. The Batteries tab lists
the status of each battery.
If the battery charge is low, connect the NetTek Analyzer Platform to
an external power source and let the battery or batteries recharge in
the instrument for eight hours. For more information, select
Start >
Help > Settings > Power Management > Charging Batteries .
Maximizing Battery Operating Time
For tips on how to maximize battery operating time, select
Start > Help > Settings > Power Management > Optimizing
Battery Life .
Transporting Lithium-Ion Batteries
Each NetTek Analyzer Platform lithium-ion battery pack contains
less than 8 grams of lithium, with individual cells each containing
less than 1.5 grams of lithium, as measured by International Civil
Aviation Organization (ICAO) standards.
Regulations regarding transportation of lithium-ion batteries on
passenger aircraft may subject this product to special handling
restrictions. Consult your air carrier for applicability and determina-
tion of any special lithium-ion battery transportation requirements.