Model 8010 High Power Device Test Fixture User's Manual
Section 3: Working with devices and instruments
8010-900-01 Rev. C / March 2017
3-25
The next figure shows how to perform a short connection test without a device inserted and how to
install a short between the fixture terminals:
Figure 34: Model 8010 CVU-3K-KIT 2-term DUT terminal short connection
The following shows a two-terminal axial DUT. This configuration can be used for testing two-terminal
TO-247 devices, as well. When testing two-terminal TO-247 devices, remove the plug from the
socket, if inserted. Make sure the four axial device terminal posts are disconnected and place the
two-terminal TO-247 device into the 3-pin socket.
Figure 35: Model 8010 CVU-200-KIT 2-terminal DUT connection
