2-13
Installation
WARNING
Clearance required between the hinge edge of both Control Panel tubs and
the finished edge of the console increases as the panel lid is opened (full
flush installation). Before marking the pilot holes, carefully open the lid on
both panels and observe that sufficient clearance is allowed.
WARNING
Do not lift the Control Panel by the handles or the transition lever arms. Take
care when opening or closing the lower panel lid. The gas shock supports
may cause the lid to open or close abruptly, causing possible injury or
damage to the equipment. Always lift the Control Panels by holding onto the
tub.
5.
Remove the upper Control Panel and use a 1/8” (3 mm) bit to drill 12 pilot
holes for the screws that will secure the upper Control Panel to the console.
6.
, make a cutout in the console to
accommodate the Model 4000-3 lower Control Panel unit.
7.
Route a 1/2” (12 mm) by 3/8” (9 mm) lip around the right, left, and lower
edges of the cutout.
8.
Route a 3/16” (4.5 mm) by 7/16” (10.5 mm) lip on the upper edge of the cutout.
9.
Carefully place the lower Control Panel into the cutout and mark pilot hole
locations for the 15 anchor screws.
10. Remove the lower Control Panel and use a 1/8” (3 mm) bit to drill 15 pilot
holes for the screws that will secure the lower Control Panel to the console.
Inserting the Model 4000-3 Panel
1.
Carefully place the upper and lower Control Panels into the cutouts in the
console.
2.
Secure the Control Panels to the console with 27 #6 (M4) screws (not included)
into the pilot holes drilled in the console.
3.
Do not connect power to the Control Panels until all cable connections have
been completed and verified.
Содержание Grass Valley 4000
