Tektronix DSA8300 Скачать руководство пользователя страница 160

Страница: 160 / 455

Commands Listed in Alphabetical Order

NOTE.

If your FILEName argument does not include a

le extension, the

extension associated with the format set by the HARDCopy:FORMat command is
automatically appended and that image-

le format is used. You can change the

le format using the HARDCopy:FORMat command, sending it before you send

the HARDCopy:FILEName command.

If your FILEName argument does include a

le extension, the image-

associated with it is used instead. The

le extension must be one associated with

one of the formats listed for the HARDCopy:FORMat command.

Group

Hardcopy

Syntax

HARDCopy:FILEName <file path>

Related Commands

HARDCopy

HARDCopy:FORMat

HARDCopy:INKSaver

Arguments

speci

es the

le to which the hardcopy is sent. This argument is a

quoted string that de

nes the

le name, path, and, optionally, the

le format if

you include a

le extension.

NOTE.

The speci

lename must be enclosed with quotation marks and wild

card characters are illegal.

Examples

HARDCOPY:FILENAME "C:\MY DOCUMENTS\TEK"

immediately outputs a

hardcopy to the

le TEK.<format>, where <format> is the image-

le format set

by the HARDCopy:FORMat command, or by the optional

lename extension.

HARDCOPY:FILENAME "C:\MY DOCUMENTS\TEK.PNG"

immediately outputs

a hardcopy to the

le TEK.PNG, where PNG is image-

le format set by the

lename extension included in the command argument.

HARDCopy:FORMat (No Query Form)

This command selects the image-

le format used with the hardcopy commands.

Several image

le formats are provided to support compatibility with

image-processing applications and ef

cient utilization of disk capacity.

2-144

DSA8300 Programmer Manual

Содержание DSA8300








































































































































































































































































































































































































































































Результаты поиска

Содержание DSA8300

Отзывы:

Бренды по названию

Популярные бренды

Tektronix DSA8300, Руководство программиста

Результаты поиска

Содержание DSA8300

Отзывы:

Бренды по названию

Популярные бренды