Tektronix CSA7404B, Руководство пользователя

Страница: 134 / 438

Triggering
3- 66
CSA7000B Series & TDS7000B Series Instruments User Manual
Be aware that auto mode, when forcing triggers in the absence of valid
triggering events, does not synchronize the waveform on the display. See the
Automatic trigger mode part of Figure 3--22. Successive acquisitions will not
be triggered at the same point on the waveform; therefore, the waveform will
appear to roll across the screen. Of course, if valid triggers occur the display
will become stable on screen.
Triggered waveform Untriggered waveforms
Normal trigger mode Automatic trigger mode
Figure 3- 22: Triggered versus untriggered displays
Trigger holdoff can help stabilize triggering. When the instrument recognizes a
trigger event, it disables the trigger system until acquisition is complete. In
addition, the trigger system remains disabled during the holdoff period that
follows each acquisition. You adjust holdoff to obtain stable triggering when the
instrument is triggering on undesired trigger events as shown in Figure 3--23.
A digital pulse train is a good example of a complex waveform. (See
Figure 3--23.) Each pulse looks like any other, so many possible trigger points
exist. Not all of these will result in the same display. The holdoff period allows
the instrument to trigger on the correct edge, resulting in a stable display.
Holdoff is adjustable from 250 ns (minimum holdoff available) to 12 seconds
(maximum holdoff available). To see how to set holdoff, see
To set holdoff on
page 3--74.
You can also set an auto holdoff. Auto holdoff varies with the horizontal scale
and is equal to 5 divisions times the current time/division setting.
Random holdoff selects a new random holdoff time for each acquisition cycle.
Rather than helping the instrument synchronize on a particular feature of a pulse
train, random holdoff prevents synchronization, helping to reveal features of
some pulse trains.
Trigger Holdoff