Tektronix CMD 80, Руководство пользователя

Страница: 643 / 672

Appendix I: Autorun
CMD 80 Digital Radiocommunication Tester User Manual
I–3
Some of the menu selections available on the Autorun MS Test menu have
several levels of submenus associated with them. Figure I–4 shows the Autorun
menu structure. The different menus are described in the remainder of this
appendix.
AUTORUN
Sequence Test
Config Menu (Set Test Parameters)
Save/Recall
Version Info
Voice Loop Test
Standby Power Test
TXD Test
RXD Test
Analog Handoff Test
Config Menu
Config Menu
Select Sequence
(Configure Test Sequence)
RFMEAS (Return to CMD80 Home Page)
Figure I–4: Autorun menu tree
The Config Menu (Set Test Parameters) provides the opportunity to establish
some of the basic CMD80 parameters, see Figure I–5. If your CMD80 is not
fully optioned, some configurations are not possible.
H
ATTEN: External Attenuation for the RF IN/OUT Connector
H
BS POWER: Base Station Power
H
RF CHANNEL: RF channel is one of the following RF channels:
US Cellular: 1 to 799, 990 to 1023 (only with Option K1)
Japan Cellular: 0 to 1199 (only with Option K1)
China Cellular: 0 to 2047 (only with Option K1)
US PCS: 0 to 1199 (only with Option K2)
Korean PCS: 0 to 1300 (only with Option K2)
H
TRAFFIC CHANNEL: Traffic channel ranges from 2 through 31 and 33
through 63, inclusive.
H
RATE SET VOCODER: Select the preferred Rate Set and the preferred
Vocoder
Rate Set 1(8k)/Basic
Rate Set 1(8k)/Enhanced
Rate Set 2 (only with Option B14)
Autorun config menu