Tektronix 070-8462-03, Инструкция по эксплуатации

Страница: 72 / 271

Specifications
1735 HD High Definition Waveform Monitor
3–7
Table 3–8: CRT display
Characteristic Performance requirements Supplemental information
Check
step
CRT Viewing Area 80
×
100 mm. Horizontal = 12.5 div.
Vertical = 1.19 V.
Accelerating Potential Nominally 13.75 kV.
Trace Rotation Range Greater than
±
1
_
from horizontal. Total adjustment range is typically
8
_
.
3
Graticule Internal, variable illumination.
Table 3–9: Power source
Characteristic Performance requirements Supplemental information
Check
step
Mains Voltage Ranges 90–250 V 2
Mains Frequency Range 48 Hz to 66 Hz.
Power Consumption 90 VA maximum
55 Watts typical
Table 3–10: Environmental characteristics
Characteristic Supplemental information
Temperature
Non-Operating –55
_
C to +75
_
C.
Operating 0
_
C to +50
_
C.
Altitude
Non-Operating To 50,000 feet.
Operating To 15,000 feet.
Vibration Operating 15 minutes each axis at 0.015 inch, frequency varied from 10–55–10 Hz in 1- minute
cycles with instrument secured to vibration platform. Ten minutes each axis at any
resonant point or at 55 Hz if no resonant point is found.
Shock Non-Operating 30 g’s, 1/2 sine, 11 ms duration, 3 shocks per surface (18 total).
Transportation This product qualified under NSTA (National Safe Transit Association) preshipment
test procedures, Project 1A–B–1.
Humidity Will operate at 95% relative humidity for up to five days.