Tektronix 070-8462-03, Инструкция по эксплуатации

Страница: 59 / 271

Operating Basics
2–22
1735 HD High Definition Waveform Monitor
e. Push the FILTER button again to exit the dual filtering mode. Note that
the function always returns to FLAT when coming out of the combina-
tion filtering routine. Turn the filter off.
f. Push and hold the FIELD/MENU button to enter the menu. Select the
DIFF STEP filter, then exit the menu.
g. Select the 5-Step Linearity signal on the TSG 1001. Note the staircase
display.
h. Turn the filter on and note that spikes replace the staircase steps. Turn off
the filter.
Figure 2–12: Multiburst signal; alternate lines filtered and flat
14. Sweep Speeds
a. Select the Color Bar signal on the TSG1001.
b. Push and hold the HORIZONTAL ONE – TWO – THREE button until
there is a one-line display of the color bar signal.
c. Push the ONE – TWO – THREE button twice to select three-line sweep.
d. Use the HORIZONTAL position control to move the display to the right
until the burst for the first line is near the horizontal center of the
graticule.
e. Push the HORIZONTAL MAG button, and adjust the position control if
necessary to return burst to the center of the graticule.