5. NETWARE DRIVERS
DC-390 Series User’s Manual
41
41
5.1.3
NetWare 3.12/SFT-III
This subsection covers the installation of the driver module DC390XR1.HAM and
DC390XR1.DDI for NetWare Versions 3.12/SFT-III.
1.
Download those two files:NWPA_UP.EXE and 312PTD.EXE from Novell website at
http://developer.novell.com/devres/sas/certinfo.htm
at
Download Upgrade Package for
NetWare v3.12.
2.
Copy NWPA_UP.EXE and 312PTD.EXE to C:\SERVER_312 directory.
3.
Copy DC390XR1.HAM or DC390R1.HAM or DC390XR1.DDI or DC390R1.DDI to
C:\SERVER_312 directory.
4.
Execute NWPA_312.EXE in the same directory.
5.
Execute 312PTD.EXE in the same directory.
6.
Create the directory C:\SERVER_312\CDSAVE
7.
Copy CDROM.NLM to C:\SERVER_312\CDSAVE
8.
Change directory to the C:\SERVER_312\312PTD\NATIVE\LOADER
lswap loader.exe C:\SERVER_312\SERVER.EXE
CD\SERVER_312
9.
Enter install at DOS command line. Proceed through the installation of NetWare v3.12 as
usual, until the installation program ends with the cursor at the server console command
line.
10.
At the server console enter the following commands.
Load C:\SERVER_312\312PTD\NATIVE\START\NPAPATCH
Load C:\SERCER_312\MMATTRFX
Load C:\SERVER_312\NBI31X
Load C:\SERVER_312\DC390XR1.HAM (or DC390R1.HAM)
11.
The install program will then require you to install additional server drivers. You may see
a message stating that the driver did not load in the time allowed. Following that, you
should see a message like that below:
Load C:\NWSERVER\DC390XR1.HAM
Loading module DC390XR1.HAM
DC-395U/W/F/U2 or DC-310(U) PCI SCSI Adapter Driver For NetWare
V3.12/V4.XX/5.XX
Version 3.03 March 1, 1999
