10
Upon completion of data exchange, the following message is displayed:
After that, actions with the keypad may resume.
6.8
The keypad
’s
built-in buzzer
(BZ) is set up as a system virtual output.
BZ starts sounding in case of any event occurs in the partition assigned to BZ. At that
display
screen
turns ON and back lighted for the
active
mode time (see Paragraph
6.2
), regardless of any key pressed. The BZ sounds for duration:
10 minutes
or until manual shutdown for
«intrusion»- and «technological»-type
partitions;
until manual shutdown for
«fire»-type partitions.
At any other cases, the keypad is in
«sleep»
mode.
6.9
The keypad does not provide for
«hot keys» for quick review of system partition
status. Information is provided in accordance with the user rights of the PIN code
entered only.
7 Keypad Menu
7.1 Menu Structure
User
authorization
is based on the user rights of the PIN code entered by pressing
«PIN-code»
OK
combination. Then the corresponding message appears on the
display, for example, for an
Operator
:
Use
▼ and ▲
buttons to move Menu items, or type the required numerical command
(see the table on pages 11 and 12).
Done
Operator menu
1. Part. control
