15
The selection is confirmed by pressing the
OK
button, and then the keypad sends the
command to the control panel, which is executed and confirmed (Paragraph
6.7
), or is
not confirmed followed by screens:
«Not executed» is possible if a sent command conflicts with the partition status. For
example: an attempt to arm not ready partition.
«
2.Arm w/bypass
» command (or
PIN-code
application followed by the
#
sign directly
from the KP keyboard, see p.
5.1
) allows bypassing faulty event sources if it is permitted
in partition settings. Arming with bypass is displayed as follows
Press
#
button to view conditions of arming,
scrolling of which is provided by pressing
▼, ▲ buttons
:
Where:
«
HE
» – type of the device that caused the
«not ready»
status of the partition
«0003/1
» – ES address (0003 – the number in the list of wireless (or hardwired)
devices, 1
– the number of the device detection channel (here, AL1 of hardwired
extender)
«
Р:007
» – partition number
«
[bypass]
»– action
«
failure
»– event type.
HE 0003/1
Р: 007
[Bypass] failure
1.
Взять
Part. control
Р007 Armed #
Not executed
Done
