AALTO CONTROL WMU USER GUIDE
VOT97, Rev 1.1, 1.3.2017
21
Make sure the table contains exactly 7 colums, and that in the file there is only information described
above. For example, do not create a header row for the information. Also, do not use special format-
ting such as colored font, bold or italics. The table should look like this:
In the example above, column A contains the RFIDs exported from the system. Column B is the lumi-
naire type. In C, Note 1 is used to describe the location in more detail, and Note 2 for describing the
luminaire type, in plain language. The luminaires are located in four different Building Locations (used
in the WMU system). Each Building contains several Areas, three of which are being displayed here.
After adding all the necessary info, save the table in plain CSV format back into the USB drive. Make
sure the file does not contain any special formatting. To make sure the file format is correct, you can
open the CSV file in a plaint text editor, such as Notepad. For example, the example table above would
look like this:
