10 TEGAM WAY • GENEVA, OHIO 44041 440-466-6100 • FAX 440-466-6110 • www.tegam.com
3-5
Section III – Work Station Configuration
When finished editing the data, press the Save button to save the data back to disk. Once the data is
saved, press the Close button to exit the form.
Editing Thermistor Mount Data
To edit calibration data files for a power splitter standard, select Configuration -> Edit Standard Data -
> Bolometer \ Mount in the menu.
Figure 3.7 Editing Thermistor Mount Data
PS-Cal opens an edit form with three tabs on the top, Load Data, Import Data and New Data. The
Load Data tab allows the user to load existing PS-Cal formatted data files from the hard drive for editing.
The Import Data tab allows the user to import data from various formats and converts the format to a
PS-Cal compatible format. The New Data tab allows the user to create a blank data file.
To load a TEGAM-formatted data file, select Import Data. In the Data Format field, select TEGAM.dat.
Click the Import Dat button, navigate to the Standards directory in the resulting dialog box. Select the
appropriate TEGAM data file and click Open.
PS-Cal will import the information from the selected data file. To verify the data, click the Data tab to see
the imported values.
Click Save to save the data as a PS-Cal-compatible file.
