TEFAL Ultimate Steam Power FV9620, Руководство пользователя

Страница: 18 / 50

14
Description
1. Spray
2. Cover for filling tank
3. Steam control
4. Anti-calc valve
5. Anti-calc valve release button
6. Turbo steam button
7. Auto- Stop safety light (depending on model)
8. Power cord
9. Easycord system
10. Thermostat light
11. Extra-stable heel
12. Spray trigger
13. Thermostat control
14. Gliss/Glide Protect TM Autoclean soleplate
(depending on model)
Before using for the first time
• Before using your iron for the first time in the steaming position, we
recommend that you let it function for a few moments in the horizontal
position and away from your clothes. Press the turbo steam button several
times in this position.
• On first use you may notice a small amount of smoke and odour or a small
discharge of particles. This is normal and will quickly disappear.
Preparation
What water to use?
• Your appliance has been designed to operate using untreated tap water. However,
it is necessary to operate the Self-Clean function regularly in order to eliminate
hard water deposits from the steam chamber.
• Never use water containing additives (starch, scents, softeners, etc.), or water
produced by condensation (e.g. water from tumble-driers, refrigerators, air
conditioners, rain water). The types of water contain organic waste or mineral
elements that can cause spitting, brown staining, or premature wear of the
appliance.
Filling the tank
• Unplug your iron before filling it.
• Set the steam control to
–
fig.1
.
• Hold the iron in one hand and tilt it slightly, pointing the soleplate upwards.
• Open the tank cover – fig.2 .
• Fill the tank to the
“MAX”
marking –
fig.3
.
• Close the tank cover.
Use
Adjusting the temperature and steam
• Adjust the thermostat control –
fig.4
, by referring to the table below.
• The light comes on. It will go out when the soleplate is sufficiently hot – fig.5 .
According to the type of fabric
selected, your iron automatically
and accurately determines the
temperature and steam flow, to
guarantee the best result.
RECOMMENDATIONS
• Your iron heats up quickly: start with fabrics that require a low heat, then finish with those that need higher
temperatures.
• If you lower the thermostat, wait for the light to come back on before starting to iron again.
• If you are ironing a fabric comprising a mixture of fibres: adjust the temperature
Read the instructions for
use carefully.
Remove any labels from
the soleplate before
heating the iron.
Do not exceed the tank's
MAX marking. Do not fill
your iron directly under the
tap. Do not remove the anti-
calc valve to fill the tank.
If your water is very hard, it
is possible to mix tap water
with store-bought distilled
or demineralised water in
the following proportions :
- 50% tap water,
- 50% distilled or
demineralised water.
= STEAM ZONE
FABRIC
POSITION OF THERMOSTAT
CURSOR STEAM SETTING
LINEN
COTTON
WOOL
SILK / SYNTHETIC (Polyester,
Acetate, Acrylic, Nylon)
MAX
•••
••
•
Please refer to safety instructions at the beginning of this booklet before using your appliance.
1800128785_01_FV96XXM0G0_110x154 15/04/13 17:19 Page14