Teeter FitSpine LX Inversion Table, Руководство по сборке, Страница: 9 / 44

Figure A
NOTE:
The Storage Caddy is included with LX9 Models
and must be attached BEFORE the Handles. If your
inversion table does not include a Storage Caddy,
proceed to the next step.
Locate the Storage Caddy with the included Phillips
Head Screwdriver and (1) Screw.
Locate the Left Handle. Markings on the Handles
differentiate the Left and Right Handles.
Align the Storge Caddy under the Hinge Cover of the
Left Handle, so that it fits over the bottom Bolt hole.
Screw in (1) Screw with the Phillips Head Screwdriver
provided until securely fastened.
7
FOR LX9 MODELS:
A S S E M B L E STO R AG E CA D DY
Figure A
Figure B
Figure B:
Ensure the Storage Caddy is securely
attached to the handle.