Teeter FitSpine LX Inversion Table, Руководство по сборке, Страница: 18 / 44

FIGURE 4
AT TACH ACUPRESSURE NODES
(OPTIONAL)
S T E P 8
Start with the smaller nodes and work your way up
to the larger ones. The ideal placement of the nodes
depends on where your muscle tension points align
with the slots in the table bed.
The pressure of the nodes will vary as the table
rotates up or down. The nodes work best between
intermediate to moderate inversion (20-45 degrees).
Full inversion moves the body away from the table
bed and will reduce the effectiveness of the nodes.
While inverted, stay at a static incline to maintain a
steady pressure, or oscillate (move between different
angles of inversion) for a massaging action.
Use of the nodes may cause muscle soreness. If you
feel any discomfort, decrease or discontinue use.
Figure 27:
Determine your desired node position
along the table bed. Unscrew the black backing from
the node and insert the backing into the slot from the
rear of the bed so the threads are visible from
the front.
Figure 28:
Twist the node clockwise into the backing
to secure. Do not overtighten to avoid damaging
the node.
Repeat, as desired, with additional nodes.
To shift node placement within a track, simply loosen
the backing and slide the node in the slot.
Use Instructions
Figure 27
Figure 28
Personalize the intensity and target zone of the Acupressure Nodes by positioning the varying
sizes along the FitSpine
bed tracks as desired.
Figure 29
16