TeeJet SmartPad II, Руководство пользователя

Страница: 194 / 198

5-22 Chapter 5 - Field Mapping
The Polygon Mark Mode
Fieldware for Smartpad II
Software Version 4.02
The Polygon Mark Mode
The Polygon Mark mode is used to map or locate features that can be represented by a closed shape made of discrete
points. A line will connected the points drop from designated antenna location.
To map a polygon mark select the polygon mark button, once selected the operator will be ask if this is and interior or
exterior polygon Figure 5-27 If interior is selected this area will be subtracted from the total area of the field. Once the
polygon type has been selected a name must be established Figure 5-27. After a name is entered begin driving around
the area to be located. Notice when the polygon mark button is selected the button changes to Mark Polygon Point
button see Figure 5-28. Drop points by selecting the mark polygon point button whenever a point should be dropped.
To close the polygon select the finish flag and the polygon will snap shut and all Mapper modes will appear in the but-
ton bar.
Figure 5-27: Polygon Mark Setup
Figure 5-28: Closing a Polygon Mark