TeeJet SmartPad II, Руководство пользователя

Страница: 174 / 198

5-2 Chapter 5 - Field Mapping
About the Mapper Application
Fieldware for Smartpad II
Software Version 4.02
About the Mapper Application
Mapping specific locations in a field is an important requirement in precision agriculture. The Mapper program
allows the operator to Map specific locations or more generalized areas of a field. Once a desired location is mapped
the operator can then return to that location at a later date or use that map as a background for future use. The pri-
mary use of the Mapper
program will be for mapping specific items such as boundaries, weed patches, Insect infesta-
tion, wet areas, Tile lines, tile risers, poles, rocks, wholes, etc. The items mapped will be stored as a .gmf file on the
data card that can be used as a background file during the Guidance or Nav2Point application.
The mapper application is used without the lightbar but the CompactFlash data card must be inserted in the SmartPad
II.
Getting to the Mapper Application
To access the Mapper application you will highlight the Mapper menu item located in the main launcher using the up
and down arrow keys on the Smartpad keypad and then press the enter key or by using the touchscreen. Once the enter
key is pressed, the Mapper main page will be displayed, Figure 5-1.
Figure 5-1: Accessing the Mapper Application
Figure 5-2: Mapper Flow Diagram