5
98-05242-ENUS R4
Matrix
®
Pro GS
aSSiSted/auto SteerinG ConfiGuration
The Matrix Pro GS is used to configure the vehicle and its implements
including assisted/auto steering and tilt. For recommendations and
factory settings for the FieldPilot or UniPilot setup values, see chart on
page 21.
To access Matrix Pro GS AutoSteer and Tilt configuration options:
1. Press UNIT SETUP bottom tab
.
2. Press CONFIGURATION side tab
.
3. Select from:
►AutoSteer – used to enable/disable assisted/auto steering as
well as establish valve setup settings, steering settings and
steering angle sensor settings; and perform valve tests, or valve
diagnostics
►Tilt Correction – used to enable/disable and calibrate the tilt
gyro module, allowing for tilt correction for application on hilly or
sloped terrain
Figure GS-8: Configuration Options - AutoSteer
Figure GS-9: Configuration Options - Tilt Correction
