92
•
Fault Retry (Setting
：
19)
•
See “Fault restart function” (Cn-24) on page 52. Upon restart, the multi-function
output terminal is ON.
•
RS-485 Communication Fault (Setting
：
20)
•
See page 106.
•
Timer Function Output
(Setting
：
21)
•
If the multi-function input terminals
g
~
j
are set as the timer input terminals
(Sn-25
－
28= 19)
，
the signal will be output through the corresponding multi-
function output terminals with the specified ON-delay and OFF-delay, as shown
below. See “Timer function” on page 44.
ON delay
(Bn-37)
OFF delay
(Bn-38)
output terminal
input terminal
~
5
8
Fig. 47The input/output signal in ‘Timer’ function application
•
RS-485 Communication Application (Setting:22)
•
In the application that the control commands are executed through the RS-485
communication port, the multi-function output terminals can be used as the PLC
Extension Output Contact Terminals. For more details, Please refer to ‘7200MA
RS-485 MODBUS/PROFIBUS Application Manual’.
Содержание speecon 7200ma
Страница 1: ......
