background image

©2016 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.

6

Tecnotion

 | www.tecnotion.com | [email protected] 

Ironless linear mot

or manual - v

er

. 1.03

BEFORE YOU START

CH 1

Series

CE

UL / CSA

RoHS

UC3

Yes

No

Yes

UC6

Yes

No

Yes

UF3

Yes

No

Yes

UF6

Yes

No

Yes

UM3

Yes

No

Yes

UM6

Yes

No

Yes

UM9

Yes

No

Yes

UM12

Yes

No

Yes

UMV12

Yes

No

Yes

UL3

Yes

No

Yes

UL6

Yes

No

Yes

UL9

Yes

No

Yes

ULV9

Yes

No

Yes

UL12

Yes

No

Yes

UL15

Yes

No

Yes

UXA3

Yes

No

Yes

UXA6

Yes

No

Yes

UXA9

Yes

No

Yes

UXA12

Yes

No

Yes

UXA18

Yes

No

Yes

UXX3

Yes

No

Yes

UXX6

Yes

No

Yes

UXX9

Yes

No

Yes

UXX12

Yes

No

Yes

UXX18

Yes

No

Yes

Table 1.2: Overview of applicable standards per motortype

1.3  Certification

All information about certifications can be found in this chapter. The 
declaration of comformity can be found in 

APPENDIX E

1.3.1  CE certification

Tecnotion B.V. declares that the UM, UL, UX,UXA and UXX linear motors 
mentioned in this Installation manual are manufactured in accordance 
with European directive 2006/95/EC and in conformity with the following 
standards, see table 1.1.

Tecnotion B.V. declares that the UC and UF linear motors mentioned in 
this Installation manual are destined to be incorporated in other machines 
or to be combined with other machines, and is not (entirely) in complian-
ce with the Machine Directive (98/37/EC). The UC and UF linear motors are 
in conformity with the following standards, see table 1.1.

1.3.2  UL / CSA certification

Tecnotion B.V. Ironless motors currently do not have UL / CSA certification. 
Please contact your local Tecnotion representative for more information.

Standard 

Name of standard

EN 60034-1: 2010

Rotating Electrical Machines, 

Part 1: Rating and performance

EN 60204-1: 2010

Safety of machinery - Electrical equipment of machines, Part 1: 

General requirements

Table 1.1: Applicable standards

1.3.3  Restriction of Hazardous Substance (RoHS)

Tecnotion B.V. declares to be compliant with the RoHS-guideline. Therefore 
Tecnotion ensures that all products are free from lead, cadmium, mercury, 
hexavalent chromium, polybrominated biphenyls or probrominated 
diphenyl ethers.

Содержание UC3 Series

















































Отзывы: