Tecnotion UC3 Series, Руководство пользователя

Страница: 8 / 48

©2016 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
8
Tecnotion
| www.tecnotion.com | sales@tecnotion.com
Ironless linear mot
or manual - v
er
. 1.03
MOTOR COMPONENTS CH 2
2.2 Additional features
For a proper installation of your linear motor system you also need:
■
fixing components, like bolts and dowel pins;
■
additional devices, like a servo controller and a linear encoder;
■
the right tools.
These features are no part of Tecnotion’s standard delivery.
2.2.1 Bolts and dowel pins
The following bolts and dowel pins are required for positioning and fixing
the coil unit to the slide as well as connecting the magnet yokes to the
mounting frame:
Features UM UL UXA UXX
Bolts for coil unit (steel) M3x16,
DIN912
M4x20,
DIN912
M5x20,
DIN912
M5x20,
DIN912
Tightening torque 1.0 - 2.0 Nm 2.0 - 3.0 Nm 3.0 - 5.0 Nm 3.0 - 5.0 Nm
Bolts for magnet yoke
(steel)
M4x25,
DIN912
M5x35,
DIN912
M6x40,
DIN912
M6x50,
DIN912
Dowel pins for magnet
yoke (optional)
3h8, DIN7
Table 2.4: Bolts for coil unit and yoke UC and UF series
Features UC UF
Bolts for coil unit (steel) M3, DIN912, Class 12.9 M3, DIN912, Class 12.9
Tightening torque 1.0 - 2.0 Nm 1.0 - 2.0 Nm
Dept bolt in threat hole Top: through coil unit
Side: 1.5 - 2.8mm
Top: through coil unit
Side: 1.5 - 2.8mm
Bolts for magnet yoke (steel) M4x20, DIN912 M4x25, DIN912
Dowel pins for magnet yoke
(optional)
3h8, DIN7
Table 2.3: Bolts for coil unit and yoke UM,UL,UXA and UXX series
2.2.2 Controller and measurement unit
Required is:
■
An appropriate servo controller/amplifier
■
A ruler and a linear encoder or an Hall module
■
Power supply, cabling and connectors
For more information please contact Tecnotion.
2.2.3 Tools
Necessary for the installation is:
■
Allen Key set
Occasionally useful are:
■
Heat sink compound (optional)
■
Isopropanolwipes to clean mounting surfaces