Tecnotion UC3 Series, Руководство пользователя

Страница: 21 / 48

©2016 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
21
Tecnotion
| www.tecnotion.com | sales@tecnotion.com
Ironless linear mot
or manual - v
er
. 1.03
OPERATION CH 4
For configuring several types of servo amplifiers Tecnotion can offer
parameter files. With these files motor specific settings can be configured.
Nevertheless, application specific settings should be configured by
yourself. Please contact Tecnotion for information.
4.3 Testing
Before handing over the control of the linear motor to the closed loop
feedback controllers, it is wise to perform some tests. Most important issue
for testing are the end switches.
4.3.1 End switches
Check proper functioning of the end switches.
4.4 Starting up
■
Start the tuning with very low speeds.
■
Increase maximum speed if everything operates properly.
Before testing, make sure that the electrical and mechanical
protection of the linear motor system is well configured!