1 INTRODUCTION
1 Scope of the manual
This instruction manual is part of the machine and it provides all the necessary information to:
•
manipulation of the machine, packed and unpacked in safety conditions
•
correct assembly of the machine
•
thorough knowledge of its operation and its limits;
According to the current regulations, the responsible of the departments where this machine
will be assembled must read carefully the content of this instruction manual and make sure
that the employees read it.
Time spent for this purpose will be rewarded by the correct functioning of the machine and by
its use in safety conditions.
This document assumes that the plants where this machine will be set comply with the current
safety regulations and hygiene conditions.
Instructions, drawings and documentation contained in this manual are reserved and intellectual
property of the manufacturer, and they cannot be fully or partially reproduced.
If the manufacturer made any change in this manual, the customer must verify that only updated
versions of it would be present in site where the machine is used.
Tecnoter srl unipersonale
Wheel washing
system
RC4.32
E16CL4
S/N
Page 3/39
Rev: 1.42 –
22/02/2017