GB / IE - 4
Part 3
Use
Working phase
IMPORTANT:
The first time the oven is switched on, you will notice a bad smell due to
production residues such as grease, oil and resin.
When using the oven for the first time, you should switch it on at the
highest temperature for at least 1 hour, making sure that it is empty.
Then, the oven is ready for use.
RECOMMENDATIONS FOR USE:
For best results, you would always better put food in a hot oven. You
ought to wait for the oven to reach the chosen temperature first.
Never cover the oven walls with aluminium sheets, especially the
bottom part of the cooking chamber.
Clean the oven after every use
.
Turning the burners on and off
COOKTOP BURNERS
Press and turn the knob “
A
” (pic.4)“ from position “ ” to "
" keeping
it pressed in.
With the igniter “
W
” (pic.6) or a match, light the flame.
After the flame has lit, hold the knob down for roughly 10 seconds
(count to 20); so the thermocouple heats up and keeps the safety valve
open.
HOT PLATE
In the models with a hot plate, lift the cover "
C
" (pic.7) and follow the
previous instructions.
For the models
PP../PFP..
light the pilot by pressing igniter button "
B
"
(pic.4) repeatedly.
NOTE:
if the piezoelectric device cannot be used, you can light the
flame by using a match or a gas lighter.
To light the main burner, turn the knob to the desired position, following
the values in the table below:
Off
Pilot flame on
Burner MAX
Burner min
TURNING THE BURNER OFF:
Turn the knob from the current position to the “
” position.
TURNING THE APPLIANCE OFF:
Turn the knob to the “
“ position.
Turning the electric oven on and off (models G7 only)
TURNING THE OVEN ON:
The heating elements are controlled by a 4-position selector switch,
while the temperature inside the chamber is controlled by a thermostat
(
60-270°C
).
The selector lets you choose the most suitable type of heating using
the appropriate heating elements.
Turn the knob “
C
” (pic.3) of the heating elements' selector to one of the
on positions . The green indicator light “
E
” (pic.3) indicates that the
oven is connected to the mains.
Turn the knob “
D
” (pic.3) of the thermostat until you reach the desired
cooking temperature. The orange luminous indicator “
F
” (pic.3)
indicates that the heating elements are on.
Be sure that the door of the oven is closed, while you
are cooking.
Positions of the knob “C”
0
Off
Top and bottom heating elements
Top heating element “Grill”
Bottom heating element
Positions of the knob “D”
0
60°C
100°C
140°C
180°C
220°C
270°C
TURNING THE ELECTRIC OVEN OFF:
Turn the knobs “
C-D
” to
0
. Turn off the switch installed upstream of the
appliance.
Safety thermostat (G7 models only)
In case of overheating, due to incorrect use or due to a faulty
component, the safety thermostat “
G
” (pic.2) is activated. It can
automatically cut off the power of the heating elements. When this
device is activated, turn the oven off, turn off the electrical power to the
appliance, close the gas tap installed upstream of the appliance and
inform the after-sales service.
Содержание PFP_12GG7
Страница 1: ...Fig 1 Abb 1 рис 1 ...
