tecnoelettra AT206, Руководство пользователя

Страница: 6 / 24

Cod.Doc.2550041-REV 2.2.0 gb.doc
Pagina 6
1.9 - Transporting
Transportation of the electric panel must be done so as not to jeopardize its structure.
On receiving the panel, inspect it for any damage suffered in transit and that the data given on the rating plate correspond to what you requested. Any
damage must be reported in writing to the carrier directly when the goods are received. Compensation for damage will be paid in accordance with
current legislation on carriage.
In the event of damage due to transportation or delivery of the wrong model, call the firm that carried out the service and “
TECNOELETTRA ”.
Before removing the packing from the electric panel, carefully read the user warnings given in this handbook.
All the packing material of the electric panel must be disposed of in accordance with current regulations.
1.10 - Overall size
The size of the control panels is suited to meet customer requirements and their dimensions are therefore shown on the "
Technical Data " identification
plate.
1.11 - Disposal
After use or in the case of demolition, the appliance must be disposed of according to the legislative provisions in force in the country it is destined for.
CAUTION!
In addition, it is wise to destroy the machine’s identification plate and any other documents.
1.12 - Assistance center
All maintenance work and technical service must be performed by “
Specialized personnel ” authorized by “ TECNOELETTRA ” who will arrange for a
technician to step in after the customer’s call.
1.13 - Repairs and spare parts
For any further inconveniences, not mentioned in this booklet or any demages of the machine, we suggest you to go to the
Retailer or Manufacturer
for the repair or possible replacement of any original spare parts.
When requesting spare parts, always:
- Quote serial number.
Identification abbreviation that is stamped onto the part.
Do not wait for the components to be worn out.
Replacing a component at the right moment means to improve the electric control board operation and at the same time avoid greater
damages.
1.14 - Guarantee conditions
See document n.5159 at the end of this section of the instruction manual
1.15 - Ordering spare parts
The spare parts orders must be accompanied with following indications:
- Serial number of the board.
- Letter/code stamped on the component to be replaced.
Due to the different types of product, it is not possible to enclose drawings of spare parts. They need to be requested with the serial number of the board
and the code of each single component.