Tecno-gaz TECNOHEART plus, Руководство пользователя

Страница: 50 / 53

45
Manufacturer declaration
WARNING: To achieve the best performance from the product and maximu
m measuring precision, use the supplied accessories or
TECNO-GAZ-recommended accessories only. Use the accessories according to
the manufacturer's instructions for use and the standards of your facili ty.
The use of accessories, transducers and cables, other than those specif ied
herein, can cause an increase in emissions and/or reduction in AED im
munity.
The AED is suitable for use in the specified electromagnetic environment. The customer an d/or
user of the AED must ensure that the device is used in an electromagnetic environme nt, as
described below
;
Table 5. Electromagnetic emissions (IEC60601-1-2)
Tests on Emissions Conformity Electromagnetic Environment
RF Emissions
CISPR 11
Group 1 The AED must transmit electromagnetic
energy in order to perform its function. Any
nearby electronic equipment may be
affected.
RF Emissions
CISPR 11
Class B The AED is suitable for use in any
business.
Table 6. Electromagnetic Immunity (IEC60601-1-2)
Immunity Test IEC60601-1-2 T
est Level
Level of Conf
ormity
Guide to the Electromag
netic Environment
Electrostatic
discharge (ESD)
IEC 61000-4-2
±6 kV contact
±8 kV air ±6 kV contact
±8 kV air
The floor must be wood,
cement or ceramic tiles. If the
floor is covered with a synthetic
material, the relative humidity
must be at least 30%.
Magnetic field
network
frequency (50
Hz)
IEC 61000-4-8
3 A/m 80 A/m It may be necessary to place
the AED far away from
magnetic field sources with a
supply frequency, or install a
magnetic shield. Any magnetic
field with a supply frequency
must be measured in the place
of installation, to ensure that it
is low enough.
Notes: UV is the d.c. network voltage before applying the test level.