Tecno-gaz TECNOHEART plus, Руководство пользователя

Страница: 34 / 53

29
MAINTENANCE
WARNING: Failure to apply the maintenance regulations contained in this manual
can damage the AED or cause it to operate defectively. Keep the AED in
good conditions according to the instructions.
WARNING: Do not allow any liquids to penetrate the AED. Avoid pouring liquids
on the AED or its accessories. Pouring liquids on the AED can damage the device
or cause fires or electric shocks. Do not sterilise the AED or its
accessories.
WARNING: Do not immerse any part of the AED in water or other types of liquid.
Contact with liquid can cause serious damage to the AED or cause fires or
electric shock.
WARNING: Do not attempt to heat the electrodes with a source of heat
exceeding 35°C.
WARNING: Do not clean the AED with abrasive materials, detergents or
solvents.
ATTENTION: Follow the local statutory laws and recycling laws on disposal or
recycling parts of the AED, including the batteries.
ATTENTION: Do not place the battery in short circuit, as this may generate heat. To
avoid short circuits, never place the battery terminal in contact with metal objects,
especially during transport.
ATTENTION: Never weld the battery directly. The heat applied during welding can
damage the safety relief valve on the cover over the battery positive pole.
ATTENTION: Do not deform the battery by applying pressure. Do not throw, strike,
drop, bend or hit the battery.
ATTENTION: Do not use the battery with batteries by other manufacturers, of other
types or models such as dry batteries, nickel-metal hybrid batteries or Li-ion
batteries, as they may lose electrolytes and heat or explode.
ATTENTION: Treat the battery with care and do not use it in applications that are not
recommended by TECNO-GAZ.
ATTENTION: Keep the battery out of the reach of children to avoid accidents.
ATTENTION: If there are any problems with the battery, immediately place it in a safe
place and contact qualified staff or your supplier.
ATTENTION: The batteries must be changed and the electrodes must be positioned
in the ambient conditions described herein. If the AED is commissioned outside of
the range of the ambient conditions, it will not operate correctly.
After using the AED, TECNO-GAZ technical support recommends performing the following
operations:
1. Use AED Event Review Software to download information on the treatment that was
carried out, and store it accordingly. (If you do not possess the AED Event Review
Software, contact your supplier to download it)
2. Remove the electrodes used by the AED and dispose of them accordingly. (For suitable
disposal methods, consult the section on recycling and disposal)
3. Check for any cracking or other signs of damage to the exterior of the AED. Immediately
contact your supplier or TECNO-GAZ technical support in case of damage.