Tecno-gaz Master-Flux, Инструкция по эксплуатации, Страница: 46 / 116

ENGLISH
16
6.4 Evacuation of exhaled gases:
To safeguard the work environment and the staff, the exhaled gases must be conveyed
outside of the work environment.
Two systems can be used to discharge the gases externally:
- Direct connection to the outside of the office
- Connection to a surgical aspirator.
It is important to evaluate:
- Whether the aspirator is suitable for the evacuation of the gases ( N
2
O and O
2
)
- The aspirator exhaust must be outdoors and ventilated.
Make sure it is compliant with regulations in force in the country of use.
Direct connection to the outside of the office
UNIT-MOUNTED MASTER FLUX - Art. 1500/AS and 1600AS
Screw the nozzles (8 - figure A3) onto the unit.
Art. 1500/AS
Turn the perforated ring nut on the valve
(31 - figure A4) until the holes close.
Art. 1600AS
Remove the supplied valve (31M -
figure A5) .
Connect the mask circuit gas exhaust tube to the nozzle (8 - figure A3) .
Connect the gas evacuation spiral tube (36 - figure A4) to the nozzle
(8 – figure A3) on the unit.
Connect the end of the spiral tube to the outside and make sure there is a final filter.
WALL-MOUNTED MASTER FLUX - Art. 1501/AS and 1601AS
Connect the gas exhaust tube to the mask circuit.
Connect the gas evacuation spiral tube (36-37 - figure A4)
to the nozzle (34 - figure A4).
Connect the end of the spiral tube to the outside and make sure there is a final filter
(37 - figure A4) .