Tecnimoem Powerlift Up 2, Руководство пользователя

Страница: 19 / 24

ENGLISH
19
When not using the hoist, it is recommended to re-charge the battery at least once every three
months to ensure it is always in good working condition.
Do not disconnect the black charger jack plug by pulling the cable. When not recharging the
battery, it is recommended to keep the mains cable plugged into the charging base to prevent any
liquids accidentally entering the socket.
If you have an extra charging base (on request), you can remove the battery from the charging base
mounted on the hoist and charge it using the extra charging base, suitably located near a mains
electricity socket.
4.3.- Changing the battery
To remove the battery from the charging base, hold the upper handle, press and remove carefully of
its support. To place the battery back in the charging base, slide it on position, join the upper handle
on the support until you hear a click
4.4.- Overload
Control box beeps twice if the actuator is overloaded (above the current limit) Start work after some
minutes when the overload will be eliminated. Work cycle aprox: 2 minutes in continuous use and 18
minutes in break.
4.5.- Improper use
Improper use of this hoist may result in injury to the users and/or damage to the device, in addition to
invalidating the warranty. Examples of improper use are.
•
Use by persons who have not read this user manual and/or who have not been trained by a
member of the authorized personnel.
• Use of the hoist, functions, accessories or movement by persons not qualified to operate the
device safely.
• Use of the electrical functions by more than one person simultaneously.
• Use with a load exceeding the maximum working load displayed on the hoist.
• Faulty connection to the mains when charging the battery.
• Connecting any devices to the hoist that have not been authorized by the manufacturer.
• Pulling the power supply cable to move the hoist.
• Cleaning the hoist with excessive water, pressure jets or in a wash-tunnel.
• Using the hoist outdoors or to move a patient inside a vehicle.
• Using the hoist on soft, unprepared terrain.
• Using the hoist on terrain with a slope gradient greater than 5º (loaded with a patient).
• Extreme, intensive use of the actuator failing to observe the maximum working load displayed on
the label.
• Using devices and/or accessories other than those recommended by the manufacturer.
• Any other use of the hoist that is not in accordance with its intended purpose.
• Do not respect work cycles: 2 minutes in continuous use and 18 minutes in rest.