Tecnimoem Powerlift Up 2, Руководство пользователя

Страница: 17 / 24

ENGLISH
17
This product complies with the standards EN 60601-1 and EN 60601-1-2 on electrical apparatus and
the electromagnetic interference of medical devices. Therefore, it does not interfere or is not
interfered when combined with other medical devices that also comply with the electromagnetic
standards.
Some apparatus, particularly older devices, which do not comply with electromagnetic compatibility
standards may, however, cause or be affected by interference when used with this hoist. If using such
apparatus, you must make sure that any potential malfunction will not harm the patient or any other
person.
Before moving the hoist, make sure the power supply cable is unplugged from the mains. Any work
on electrical parts may only be undertaken by authorized, qualified personnel.
3.- ASSEMBLY
No tools are necessary to assemble the hoist, although some parts are considerably heavy. It is
therefore advisable to use the assistance of a helper when handling such parts. Put particular attention
to avoid being knocked or trapped.
3.1.- Components
(see page 3)
BASE STRUCTURE
1.- Base
2.- Back castors Ø 100mm(with brake)
3- Side castors Ø 50mm w/o brake
4.- Front castors Ø 50mm w/o brake
5.- Platform feet
MAST – HANDLE STRUCTURE
6.- Mast
7.- Handle
8.- Handle for user
9.- Handle for patient
10.- Support for sling
11.- Electric motor
12.- Battery charging base
13.- Removable battery
14- Remote control
15.- Locking knob (top)
16- Locking knob (lower)
17.- Mast bracket (actuator lower support)
18.- Boom bracket (actuator top support)
19.- Support for knees
20- Mast for knee’s support
3.2.- Joining the pre-assembled structures
(see page 4)
Remove packing carefully.
DON’T REMOVE THE GREY PLASTIC PIECES (A) OF THE MAST BASE
Place the base structure on the ground with the back casters braked. Remove the top locking knob
(15) and the lower locking knob (16) of mast.
Insert mast (6) into the base (1), following insert the lower locking knob (15) fixing the mast (6) to the
base (1) and mast for knee´s support (20).
Finally, hang lower locking knob (16) that adjusts the base (1) to the mast (6).
Knee´s support (19) have to put with the mast for it (20), and you will have five different positions.