Tecnimoem Powerlift Up 2, Руководство пользователя

Страница: 22 / 24

ENGLISH
22
• Avoid any excess water on the connector sockets.
• Dry the hoist thoroughly before using again.
• Use clean cloths, disposable or recyclable. .
• Use a diluted solution of detergent or disinfectant, or a spray-on disinfectant.
6.2.- Safety rules for maintenance
Maintenance operations may only be performed by duly qualified and authorized technical
personnel. Contact your local Tecnimoem 97, S.L. distributor for any specific issue in connection with
maintenance and/or servicing.
Before performing any maintenance or repair operation:
•
Make sure the hoist is immobilized (if no movement is envisaged) and disconnected from the
electricity mains.
• Press the red stop button to shut off the electrical functions.
• Do not under any circumstances open or puncture an electric motor.
6.3.- Preventative Maintenance
It is advisable to carry out a yearly maintenance check of the hoist and its accessories to ensure they
are kept in good working order. Special attention should be paid to the following aspects:
•
Operating controls and mechanisms.
• The hinges where the hoist and accessories move.
• The condition of the electric cables and the water-tightness of the electrical devices.
• The condition of the sling (wear and fraying, tears, distortion, etc.).
It is recommended to grease the hoist’s hinges regularly.
Adapt the frequency and intervals of maintenance checks to the condition of the hoist and the specific
circumstances of its use.
6.4.- List of spare parts
On request, electrical equipment (battery, actuator, control unit, charging cable or control box),
harness, wheels and other components of the metal structure of the crane can be replaced.
6.5.- Transport and storage
During transport, the hoist must be in the low position, with its functions disconnected and the brakes
on the wheels on. Additionally, it must be secured with straps and protected against water and
humidity (75%), at a temperature between -20ºC and +50ºC.