- 53 -
Data sent from the WP20 in automatic (or manual) modes will be in the following format:
[Station ID] [Data Value(s)] [Carriage Return]
The station ID is a single ASCII character from A to P specifying the unit address.
When status is sent, it is a single ASCII character defined as follows:
P
Positive RATE (normal operation, positive rate)
N
Negative
RATE
Z
AUTO
ZERO
in
progress
T
Auto Tracking in progress
S
AUTO
SPAN
in
progress
A
Alarm
condition
E
Weight processor error (scale data error, etc.)
L
Low Battery
Example 1: Station K has a RATE of 450 and the Command Menu parameter is 01 (RATE):
[ Station ID ] [ RATE ]
[ Carriage Return ]
K (one character) 0450 (four characters) ^M (one character)
Example 2:
Station C has a SPEED of 375 and the Command Menu parameter is 03 (SPEED):
[ Station ID ] [ SPEED ] [ Carriage Return ]
C (one character) 0375(four characters) ^M (one character)
Example 3: Station A has a RATE of 103.8, the TOTAL is 399.75, and the Command Menu
parameter is 14 (RATE, Status, TOTAL):
[ Station ID ] [ RATE Status TOTAL ]
A (one character) 1038 (four characters) P (one character) 00039975 (eight characters)
[ Carriage Return ]
^M (one character)
8.03 Manual Transmission
If the Command Menu Parameter is set to 00 in the WP20, it will only send data after a request is
made. The same data is available and is returned in the same format using ASCII characters as
outlined in the above section for Automatic Transmission. The data request is sent in the format
([Station ID] [Command parameter] [Carriage Return]) and as defined below:
[Station ID] A to P (one character)
[Command parameter] (from the list in sec. 9.2, (01 to 19) (two characters)
[Carriage Return] ^M (one character)
Example: A request for RATE and TOTAL is sent to Station A:
[ Station ID ] [ command parameter ]
[ Carriage Return ]
A (one character) 04 (two characters) ^M (one character)
Note that the WP20 has a 16 command input buffer.
Содержание Tecweigh 20
