- 68 -
9.07 “scale data error” Trouble Shooting Procedure
The “scale data error” message indicates a communications problem between the
Tecweigh
WP20 and the scale’s signal conditioner (SC). The following is a list of processors and SC’s that
apply.
Processors:
MP400, MP300, MP200, WP20-02B, WP20-02A, WP20-02.
Signal conditioners:
SC400 (lvdt’s), SC300 (load cells), SC200 (lvdt’s), SC100 (load cells), ET20-04B (lvdt’s),
ET20-04A (lvdt’s), ET20-04 (lvdt’s), ET20-07 (load cells).
If a lightening strike is a possibility, first visually inspect both the WP20 and SC printed circuit
boards (PCB) for physical damage. If damage is evident,
both
boards should be returned to
Tecweigh
for servicing. Contact the
Tecweigh
Service or Parts Departments (Section 2.01) for
further instructions.
If no physical damage is evident, the next step is to check several DC voltages at terminals on
the PCBs. First disconnect from the
WP20 PCB
the four wires (or the plug-in connector) that
connect the WP20 to the SC. Next, measure the voltages between the following terminals on the
WP20 PCB. The indicated voltages are what should be present at the terminals. Terminal 10
(CM) is common (-).
10 to 20 ------------------------------ 2.4 +/- 0.2 vdc.
10 to 22 ------------------------------ 2.4 +/- 0.2 vdc
10 to 29 (MP400 ac version) ------30.0 vdc
10 to 29 (MP400 dc version) ------28.0 vdc
10 to 29 (older PCBs) ---------------24.5 vdc
If the voltages are not correct, the WP20 PCB is defective. If this occurs,
both
the WP20 and SC
PCBs should be returned to
Tecweigh
for servicing. Contact the
Tecweigh
Service or Parts
Departments (Section 2.01) for further instructions.
If the voltages are correct, reconnect the four wires (or the plug-in connector) at the WP20 PCB
and disconnect the same four wires (or plug-in connector)
from the
SC PCB. Now measure the
LVDT
Clamp
Bolts
LVDT
Wiring
Clamp
Screw
Possible
Pitting
LVDT
Spring
Center
Plunger
Содержание Tecweigh 20
