www.tecnaonline.com - [email protected]
E N G L I S H
PAR
DESCRIZIONE
10.2
INSPECTION AND MAINTENANCE
WEAR MAINTENANCE
All movable parts are subject to wear, which depends on the operating time, load factor and the
operating conditions. There are a few recommendations since the operating conditions are varied.
Period
Operating hours
Abbreviation in the maintenance
and inspection plan
Semi-diurnal
4
1
Daily
8
2
Once in two weeks
80
3
Every 6 months
Approximately 1000
4
Every 12 months
Approximately more than 1500
5
10.2.4
MAINTENANCE AND INSPECTION PLAN
You must reduce the maintenance interval in case of major stress on the hydraulic breaker or
due to environmental influences (e.g. lot off dust formation, high humidity).
Follow the maintenance and inspection instructions of the support frame; see the
operating manual of the support frame.
OPERATING MANUAL
-
H
ydraulic
breakers
T
series
35
/44
REV
0.0
MAINTENANCE (DIN EN 31051)
10
