www.tecnaonline.com - [email protected]
E N G L I S H
8
OPERATION
PAR
DESCRIPTION
8.1
OPERATING RANGE
8
OPERATION
PAR
DESCRIPTION
8.2
SITE SELECTION
The support frame should stand on a smooth firm ground. Extra caution must be exercised in case
of an uneven, sloping or movable sub-surface; see operating manual of the support frame.
DANGER OF MATERIAL DAMAGE AND PERSONAL INJURIES!
Working with the hydraulic breaker requires basic mechanical and hydraulic knowledge and
knowledge regarding the operation of the support frame and thorough knowledge of the working
of the hydraulic breaker.
Only qualified personnel may work with the hydraulic breaker (see section "2.2 QUALIFICATION
OF THE PERSONNEL” on page 5).
OPERATING RANGE
DANGER OF MATERIAL DAMAGE AND PERSONAL INJURIES!
The support frame may be come unstable if used beyond the prescribed operating range, where
it would no longer have any stability and can topple.
Nobody should be present within 10 m of the tool when the hydraulic breaker is in operation since
torn material can fly around.
»
Stick to the operating range and follow the operating manual of the support frame.
»
Stop work with the hydraulic breaker immediately if any persons are present in the operating range.
The hydraulic breaker may be operated in certain areas only; see the operating manual of the
support frame.
The hydraulic breaker must always be within the operator’s field of vision during operation; therefore,
you must always position the support frame such that the operator always has a free field of vision
of the hydraulic breaker.
DANGER
DANGER
OPERATING MANUAL
-
H
ydraulic
breakers
T
series
26
/44
REV
0.0
OPERATION
8
