Subject to technical modifications without prior notice.
TP-20.1 u. 30.1-07/13
Dear Customer,
We thank you, that you have decided to buy our garage door operator.
This garage door operator is designed only for the automatic operation of spring-balanced up-and-over doors and sectional
doors for domestic use.
The operator is not suitable for heavy duty, i.e. doors that are not possible to be opened or closed by hand, or where this is only
possible with great difficulty. Ensure that it is easy to open and close the door manually before installing the operator.
Before installing the operator, ensure that the mechanics of the entire door system are in perfect working order. Before the
operator is installed, any of the door‘s mechanical locks and latches must be immobilised.
The operator is designed for use in dry buildings and therefore must not be installed outdoors.
The construction of the garage ceiling must be such that safe, secure anchoring of the operator is guaranteed.
Make sure that the emergency release cable of the operator cannot get caught up in the roof rack or in any other protruding
parts on the vehicle or the door.
It must be ensured that all national regulations governing the operation of electrical equipment are complied with. We accept
no responsibilty for improper operation or improper maintenance/servicing of negligent operation or improper maintenance/
servicing of the door, the accessories and the garage door operator.
For the installation work, the applicable regulations regarding working safety must be complied with (e.g. accident prevention
regulations, workplace regulations ASR A1.7)..
Permanently installed controls (e.g. buttons or similar devices) should be installed within sight of the door. Keep the controls
away from any moving parts and at a height of at least 1.5 metres. It is important that they are out of reach of children.
Initial function checks, as well as programming or making changes to the remote control, should always be carried out inside
the garage.
The manufacturer is exempt from any guarantee obligations and product liability if the customer makes any changes to the
operator without the prior approval of the manufacturer. Any changes carried out, only with the manufacturer‘s prior approval.
Warning notices about the risk of entrapment must be permanently fixed in a conspicuous place or near the permanently ins-
talled buttons used to actuate the operator.
The door operator may not be used if repair or adjustment work is carried out.
Always be sure that no persons or objects are located within traveling range of the door.
Important safety notice! Please keep these instructions safe for later reference.
18 general safety
