User Manual
21
Latch time:
you can set how long the buzzer will sound when object move is detected
(10s, 20, 40s, 60s);
Show Message:
You can set show message on the screen when motion alarm is detected.
Buzzer time:
you can set how long the buzzer will sound when motion is detected
(10s, 20, 40s, 60s);
Send Email
：
Allows you set the alarm images is issued to a specified email.
Full screen Alarm:
The function is defaulted to “On". When the motion is detected,
the corresponding channel will be switched to the full screen mode.
Record Channel:
the record channel will be activated when the object move is detected.
Post Recording:
you can set how long alarm record will last when alarm ends (30s,
1minute
，
2minute
，
5minute).
Copy:
allow you copy current channel parameters to any other channel or all
channels.
Picture 5-41
5.3.5.2 Alarm Set
Click [Main Menu
Alarm
Alarm] to enter into the below window shown as Picture 5-42.
Now you can perform alarm set based on different status. Details please refer to List 5-1.
Picture 5-42
Latch time:
you can set how long the buzzer will sound when external sensor alarm is
detected (10s, 20, 40s, 60s);
Show Message:
You can set show message on the screen when sensor alarm is detected.
Buzzer time:
you can set how long the buzzer will sound when sensor alarm is detected (Off,
10s, 20, 40s, 60s);
Send Email
：
Allows you set the alarm images is issued to a specified email.
Full screen Alarm:
The function is defaulted to “On". When the motion detection or
No:
allow you select one desired channel
I/O Status:
allows you select the three options –
NO (Normal Open), NC (Normal Close) and OFF.
Set to “Normal Open”, I/O status Alarm will be
activated while sensor is ON; set to “Normal
Close”, I/O status alarm will be activated while
sensor is OFF; set to “OFF”, I/O status alarm will
not be triggered.
Alarm out:
allow you connect external alarm
sensor.
The channel will be separated into a
15X12grids (PAL mode) or 15X10grids (NTSC
mode). When any object moves into the motion
detection area, and the area where the object is
located is displayed in red and motion detection will
be triggered. In the semi-transparent area the
motion detection is not activated.
