Techsys SWORDFISH+, Руководство по эксплуатации

Страница: 25 / 61

www.techsys.com.au Version 1.3 11/12/11
25
C o r p o r a t io n
L
e
v
e
l
TIME
Level trip 1 High
Level trip 1 Low
Relay Energized
Relay Energized Relay Off
Relay State
Trip Point Low
SWO has the ability to energize an output relay
based on specific level points. This can be useful for
monitoring other functions through out the system that are
not directly affected by the SWO control. Trip Point High also has to be set,
see below. See Output Relays section for more information on how to set this feature.
Note: The “Trip Point Low” and “Trip Point High” screens will only appear if an
output is set to “Trip Point ” within the OUTPUTS menu.
Trip Point High
The Trip Point High is the mating pair to the Trip Point low. If a single trip point is required
set the High and Low trip points to the same value.
Note: The settings of Trip Point High must be greater or equal to Trip Point Low. The
system constrains settings outside this range.
Note: The “Trip Point Low” and “Trip Point High” screens will only appear if an output is
set to “Trip Point ” within the OUTPUTS menu.
Trip Point High
XXXX
Trip Point Low
XXXX