Techsys SWORDFISH+, Руководство по эксплуатации

Страница: 13 / 61

www.techsys.com.au Version 1.3 11/12/11
13
C o r p o r a t io n
Main Menu Sub Menu Units Defaults Range
SETTINGS
*LoLevel Shutdown *150 0 - 9999
*LoLevel Alarm *150 0 - 9999
*Low Limit *OFF *OFF
*Cut In Level (1,2,3) 200 0 - 9999
*Cut Out Level (1/2/3) 450 0 - 9999
*HiLevel Shutdown 650 0 - 9999
*HiLevel Alarm 650 0 - 9999
*High Limt *OFF *OFF
Alt Cut In 2 250 0 - 9999
Alt Cut Out 2 500 0 - 9999
Alt Cut In 3 300 0 - 9999
Alt Cut Out 3 600 0 - 9999
*Trip Point Low 300 0 - 9999
*Trip Point High 400 0 - 9999
* LoLevel Shutdown is dispalayed when "Low Level Action" is set to "Shutdown"
* LoLevel Alarm is dispalayed when "Low Limit Action" is set to "Alarm"
* Low Limit "OFF" is dispalayed when "Low Limit Action" is set to "OFF"
* HiLevel Shutdown is dispalayed when "HighLimit Action: is set to "Shutdown"
* HiLevel Alarm is dispalayed when "HighLimit Action: is set to "Alarm"
* High Limit "OFF" is dispalayed when "High Limit Action" is set to "OFF"
*Trip Point Low & High are displayed when a "Digital Output" is set to "Trip Point"
*Cut In Level is start level for all pumps when "Operation Mode" set to "Single Level"
*Cut Out Level is stop level for all pumps when "Operating Mode" set to Single Level"
*Cut Out Level 1 /2 /3 etc is individual pump stop level when "Operating Mode" set to "Multi Level"
*Cut In Level 1/2/3 etcis start level for all pumps when "Operation Mode" set to "Single Level"
Main Menu Sub Menu Units Defaults Range
TIMING
*Lo Press Delay seconds 120 *OFF, 0 - 250
*High Press Delay seconds 4 *OFF, 0 - 250
In Delay Timer seconds 4 0 - 999
Out Delay Timer seconds 1 0 - 999
Restart Delay seconds 0 0 - 999
No Flow Timer seconds 0 0 - 250
Input Delay Timer seconds 120 0 - 999
*Press Trip Low Delay seconds 0 0 - 999
*Press Trip High Delay seconds 0 0 - 999
*Min Pump Runtime seconds 60 0 - 240
*Max Pump Starts per Hour 60 0 - 240
* Press Trip delays are only visible if an OUTPUT is set to "Pressure Trip"
* "Min Pump Runtime" Is displayed when "ExcessRun Prot'n" is set to "Minimum Run Time"
* "Max Pump Starts" Is displayed when "ExcessRun Prot'n" is set to "Max Starts PerHr"
* OFF is displayed in the "Lo Press Delay" screen when "Low Limit Action" is set to "OFF"
* OFF is displayed in the "Hi Press Delay" screen when "HighLimit Action" is set to "OFF"