Techsys SWORDFISH+, Руководство по эксплуатации

Страница: 18 / 61

www.techsys.com.au Version 1.3 11/12/11
18
C o r p o r a t io n
In the event of a new fault, which has been automatically
reset, the default screen will display the
message “New
Fault”. Go to the FAULT HISTORY to view this fault. Faults
that are active will remain live on the screen until the ENTER Key is pressed to clear the
fault.
Faults will appear in the Fault sub menu in the following
format with the most recent fault being Fault 1.
Note: The FAULT HISTORY menu is cleared when the
system is first powered up.
“Pump 1 - 6 Shutdown” signifies that the corresponding
“Pump protect 1-6” input has been activated for the period of the input delay time.
“Auto Reboot” denotes that the SWO has automatically restarted due to an
internal reset, whereas “Power Failure” records that the SWO has recovered
from a power supply disconnection. A very short disconnection of power will record a
“Power Glitch” message, typically around 0.1seconds.
The FAULT HISTORY menu is always visible regardless of whether the Access Code is
correct.
To reset the complete FAULT HISTORY by pressing ENTER then DOWN and then
ENTER again when at Fault 1. Individual Faults can be reset by completing the same
action while displaying the Fault screen to be reset.
** NEW FAULT **
Last Fault (No.1
Lo Level Shutdown
Fault 2
Auto Reboot