Techsys SWORDFISH+, Руководство по эксплуатации

Страница: 38 / 61

www.techsys.com.au Version 1.3 11/12/11
38
C o r p o r a t io n
INPUTS
INPUTS
Program Input 1 selection System Pause, *Alt 2 Settings
Program Input 2 selection Pump 1 Protection, *Alt 3 Settings
Program Input 3 selection Pump 2 Protection, *Cut In,
Program Input 4 selection Pump 3 Protection, *Cut Out,
Program Input 5 selection High Limit, Low Limit,
Program Input 6 selection Low Limit, High Limit,
Program Input 7 selection No Flow, System Pause,
Program Input 8 selection *Alt 2 Settings *Pump 1 - 6 Protection,
Program Input 9 selection *Alt 3 Settings *Pump 1 - 6 Stop,
Program Input 10 selection Reset, *Pump 1 - 6 Manual Run,
Program Input 11 selection Cycle Pumps, Fire Mode,
Program Input 12 selection Aux Input 1 Cycle Pumps,
Reset,
No Flow,
Aux 1, Aux 2, Aux 3,
*Pump 1 - 6 No Flow Prot,
There are 12 main inputs with the SWO that control the external sensing
functions.
They all require
VOLTAGE FREE contacts and as such should NOT HAVE ANY
VOLTAGE APPLIED.
•
All inputs operate on a CLOSED CONTACT for registration. This contact needs to
be made between the input common and the relevant input. There are three
terminals for the input Common to allow for multiple connections.
You can view which inputs are activated by the leds on the front of the unit and also
within the PUMP DATA LOG menu under the “Digital Input State” screens. See PUMP
DATA LOG for more information.